Brightway Group

Automatic Battery Charger & Alternator Condition Tester for Hydraulic Lift and Dump Trailers - 12V - 1.5 Amp

(No reviews yet) Write a Review
SKU:
BW5210
UPC:
848050052101
MPN:
5210
Availability:
In Store or Shipping
  • Automatic Battery Charger for Hydraulic Lift and Dump Trailers - 12V - 1.5 Amp | Battery Specialist Canada
  • Automatic Battery Charger & Alternator Condition Tester for Hydraulic Lift and Dump Trailers - 12V - 1.5 Amp | Battery Specialist Canada
  • Automatic Battery Charger & Alternator Condition Tester for Hydraulic Lift and Dump Trailers | Battery Specialist Canada
$52.95

Description

Designed for hydraulic lift or dump trailers, this smart charger can be mounted inside the hydraulic pump or lift motor housing. Creates a shore power plug, which lets you plug in an extension cord to draw power from a wall outlet.

Features:

  • AC-to-DC switch mode-charger quickly charges and maintains your battery
    • Great for hydraulic dump or lift trailers
  • Charger mounts inside hydraulic pump or lift motor housing
  • Easy-to-read display shows charging status
    • Chamfered LED panel provides clear viewing angle
  • Push-to-test button lets you check battery state of charge and alternator condition
  • Shore power plug provides a convenient access point to plug an extension cord into the charger
  • Switch mode cuts power when battery is fully charged
    • Prevents overcharging and helps extend battery life
  • Durable plastic cover on shore power plug keeps out elements
    • Easily attaches to your trailer with included hardware

Operation:

  1. Connect the positive red cable to the positive terminal of the battery
  2. Connect the negative black cable to the negative terminal of the battery
  3. Connect the power outlet (120 VAC/60 60Hz) to the 3 prong plug of the battery charger
  4. The LED on the battery charger will indicate the status of the charger
  5. The LED on the battery tester will indicate the status of the battery and alternator/charging system
  6. To test a battery, the vehicle's engine , lighting and accessories must be off
  7. To test an alternator/charging system, the engine must be running at 2,000RMP minimum
  8. The lights and accessories must be turned off and the unit must be unplugged for the AC power
  9. Then simply push the "PUSH" button to get your test results.
  10. See user manual for reference chart
View AllClose

Additional Information

Charger Voltage:
12 Volt
Charger Amperage:
1.5 Amp
Charger Plug:
Ring Terminal
View AllClose