24V 8A Three stage Automatic - 71625 Charger - Maintainer - WheelChair - Scooter - Model 24BC8000T-4

The Universal Power Group 24 Volt - 8 Amp AGM Battery Charger is designed for use with larger Mobility Scooters and Power Wheelchairs that use the standard 3 Pin XLR connector.

The float mode in this charger allows it to be connected when the chair or scooter is not in use, keeping the depth of the discharge to a minimum which will increase battery life.

The Universal 24BC8000T-4 24 Volt 8 Amp AGM Battery Charger is particularly suited for larger mobility applications like wheelchairs or scooters that use the standard 3 pin XLR connector and chargers batteries from 27Ah to 80Ah (EXCEPT Everest-Jennings chairs). These units are specifically built for mobility applications. Proper maintenance of lead acid batteries keeps them healthy, and increases their life expectancy. The float mode in these chargers allows them to be connected whenever the chair or scooter is not in use, keeping the depth of discharge in the batteries to a minimum. This increases battery life. This is a durable cased unit. The 24BC8000T-4 is excellent for use on deep cycle batteries. Replaces oem ELEASMB5669, ELE110V1041, ELECHG1017, 18330-48, CK84207000, A24080-10D, 1123249, BAT-GC0811, BAT-EN0811, 16810, 1053161, 1062556, 1014758, 12620, 12610 type 24EL8, 24v 8a, 24v 8 amp, 8.0a, 7 amp, 7a, 7.0a 

For the complete spec sheet pdf click here.

Features

• Complete 3 stage process - Bulk charge, absorption, maintenance/float
• Short Circuit Protection - Prevents damage caused when operating in short circuit condition for an indefinate period of time.  The charger is "self-recovering" when the fault condition is removed.
• Reverse Polarity Protection - Prevents damage when the positive and negative polarities are connected in reverse.
• Fully Automatic Operation - Safely charges and maintains a full charge.  The final stage of charging is the flot mode and the battery may remain connected indefinitely.  In this mode the charger maintains a full charged battery.
• Designed to Prevent Over Charging - Automatically switches to float mode.
• Low Voltage Protection - When the battery voltage is below the preset value, the charger will not start charging.  This protects the charger from defective batteries.
• LED Display - 2 LED displays indicate the charging or fault status.
• Light Weight - Switch mode chargers are lighter and more efficient than linear type chargers.
• Not intended for use as a DC power supply
• Comes with XLR Connectors