Description
This SLA battery charger is a 3-stage charger for AGM Sealed Lead Acid (SLA) batteries.
Perfect fit for wheelchairs and scooters that use a standard 3 pronged XLR connector. The charger is intended to be used while the wheelchair or scooter is not being used. This will keep the batteries healthy, and increases their life expectancy.
- Features
- Complete 3 stage process - Bulk charge, absorption, maintenance/float
- Short Circuit Protection - Prevents damage caused when operating in short circuit condition for an indefinate period of time. The charger is "self-recovering" when the fault condition is removed.
- Reverse Polarity Protection - Prevents damage when the positive and negative polarities are connected in reverse.
- Fully Automatic Operation - Safely charges and maintains a full charge. The final stage of charging is the float mode and the battery may remain connected indefinitely. In this mode the charger maintains a full charged battery.
- Designed to Prevent Over Charging - Automatically switches to float mode.
- Low Voltage Protection - When the battery voltage is below the preset value, the charger will not start charging. This protects the charger from defective batteries.
- LED Display - 2 LED displays indicate the charging or fault status.
- For any type of lead acid battery, including conventional, maintenance free, deep cycle, Gel Type.
- Not intended for use as a DC power supply
- Comes with XLR Connectors
- 24BC5000TU-1, 24BC5000T-4
Additional Information
Charger Voltage: |
24 Volt |
Charger Amperage: |
7 Amp |
Charger Plug: |
XLR - Wheelchair |